Conveyor Switches from Bulk Pro Systems
Bulk Pro Systems Conveyors Switches are process instruments that are designed to protect the conveyor belt from damage or operators in the case of an emergency.
Bulk Pro Systems carries a complete line of conveyor switches consisting of Pull Cord Switches, Belt Misalignment Switches, Position Switches and Belt Damage Detectors.
We have models that have the CE, CSA and Hazardous location approvals. All of Bulk Pro Systems Conveyor Switches are built for the most rugged industrial applications with die cast aluminum enclosures, 304 stainless steel shafts and a baked on yellow epoxy based urethane finish.
These switches are currently being used on conveyors all over the world. Bulk Pro Systems Conveyor Switches will allow you to quickly shut down a conveyor belt, protect you from costly repairs and give you peace of mind.
Industries Served:
- Mining
- Electric Utilities
- Aggregates
- Steel
- Minerals
- Wood
- Paper
- And Many Others
Bulk Pro Systems
Model BD-3 Belt Damage Detector
The model BD-3 Belt Damage Detector switches are conveyor safety accessories designed to interlock with the conveyor shut down systems in the event of a damaged belt.
They are mounted in pairs, one on each side of the belt with the cables crossing in the middle.
In the event where something is sticking through the belt or a splice has failed it will come in contact with these cables pulling the ball out of the socket at the switch. This will cause the red actuator arm to displace from its normal position tripping both micro switches inside.
One switch for shut down and the other for alarm annunciation. This simple system will protect conveyor belts from costly repairs and downtime due to belt damage.
The BD-3 Belt Damage Detector can be ordered in standard, CE and CSA approved versions.
CSA approved version BD-3X is also approved for Class II, Div. 1 & 2, Groups E, F & G.
- Simple, reliable construction requiring no maintenance
- Easy installation
- Die cast aluminum enclosure
- Corrosion resistant yellow epoxy polyester powder coat finish with red trip arm
- Two (2) contact outputs for shutdown and alarm notification
- 304 stainless steel hardware and shafts
- Standard, CE and CSA Approved versions available
- CSA approved version BD-3X is also approved for Class II, Div. 1 & 2, Groups E, F & G.
Available Downloads
Bulk Pro Systems
Model BM-2C Belt Misalignment Switch
The model BM-2C Belt Misalignment switches are conveyor safety accessories designed to interlock with the conveyor shut down systems in the event of conveyor belt misalignment.
They are mounted in pairs, one on each side of the belt with the roller actuator arms positioned approximately one inch from each side of the belt.
In the event where the conveyor belt tracks off the idlers in either direction it will cause the roller actuator arm to move, tripping one or both micro switches inside the switch.
There are two independent micro switches inside the enclosure, one for alarm annunciation (set at 10 degrees) and the other for shut down (set at 20 degrees) from the original position. This simple system will protect conveyor belts from costly repairs and downtime due to belt misalignment.
The BM-2C Belt Misalignment Switch has CE agency approval.
- Simple, reliable construction requiring no maintenance
- Easy installation
- Die cast aluminum enclosure
- Corrosion resistant yellow epoxy polyester powder coat finish with red roller arm
- Two (2) contact outputs for shutdown and alarm notification
- 304 stainless steel hardware and shafts
- Roller arm good to 1200 RPM
- Four (4) bolt mounting from the bottom or the back of the switch
- CE Approved
Available Downloads
Bulk Pro Systems
Model BM-3 Belt Misalignment Switch
The model BM-3 Belt Misalignment switches are conveyor safety accessories designed to interlock with the conveyor shut down systems in the event of conveyor belt misalignment.
They are mounted in pairs, one on each side of the belt with the roller actuator arms positioned approximately one inch from each side of the belt.
In the event where the conveyor belt tracks off the idlers in either direction it will cause the roller actuator arm to move, tripping one or both micro switches inside the switch.
There are two independent micro switches inside the enclosure, one for alarm annunciation (set at 10 degrees) and the other for shut down (set at 20 degrees) from the normal position.
This simple system will protect conveyor belts from costly repairs and downtime due to belt misalignment.
The BM-3 Belt Misalignment Switch can be ordered in standard and CSA approved versions.
CSA approved version BM-3X is also approved for Class II, Div. 1 & 2, Groups E, F & G.
- Simple, reliable construction requiring no maintenance
- Easy installation
- Die cast aluminum enclosure
- Corrosion resistant yellow epoxy polyester powder coat finish with red roller arm
- Two (2) contact outputs for shutdown and alarm notification
- 304 stainless steel hardware and shafts
- Roller arm good to 1200 RPM
- Two (2) bolt mounting from the bottom of the switch
- Standard and CSA Approved versions available
- CSA approved version BM-3X is also approved for Class II, Div. 1 & 2, Groups E, F & G.
Available Downloads
Bulk Pro Systems
Model PS-2C Position Switch (Tripper Position Switch)
The Model PS-2C Position Switch is utilized to monitor the position of heavy moving machinery.
The roller actuator arm on the switch is design to make contact with moving machinery and once it is moved from its normal position two micro switches are tripped.
These switches can be used to send an alarm to the control system or operator. It notifies the control system or operator that the machinery has hit its limit of travel so steps can be taken to stop the machinery or start the process. It basically operates as a heavy duty limit switch. For example PS-2C switches can be used to notify the control system or operator of the position of a tripper car, gravity take up or stacker conveyor.
The are unlimited possibilities to use this switch in your operation.
The PS-2C Position Switch has CE agency approval.
- Simple, reliable construction requiring no maintenance
- Easy installation
- Die cast aluminum enclosure
- Corrosion resistant yellow epoxy polyester powder coat finish with red roller arm
- Two (2) contact outputs for shutdown and alarm notification
- 304 stainless steel hardware and shafts
- CE Approved
Available Downloads
Bulk Pro Systems
Model PS-3 Position Switch (Tripper Position Switch)
The Model PS-3 Position Switch is utilized to monitor the position of heavy moving machinery.
The roller actuator arm on the switch is design to make contact with moving machinery and once it is moved from its normal position two micro switches are tripped.
These switches can be used to send an alarm to the control system or operator. It notifies the control system or operator that the machinery has hit its limit of travel so steps can be taken to stop the machinery or start the process. It basically operates as a heavy duty limit switch. For example PS-3 switches can be used to notify the control system or operator of the position of a tripper car, gravity take up or stacker conveyor.
There are unlimited possibilities to use this switch in your operation. The PS-3 Position Switch can be ordered in standard and CSA approved versions.
CSA approved version PS-3X is also approved for Class II, Div. 1 & 2, Groups E, F & G.
- Simple, reliable construction requiring no maintenance
- Easy installation
- Die cast aluminum enclosure
- Corrosion resistant yellow epoxy polyester powder coat finish with red roller arm
- Two (2) contact outputs for shutdown and alarm notification
- 304 stainless steel hardware and shafts
- Standard and CSA Approved versions available
- CSA approved version PS-3X is also approved for Class II, Div. 1 & 2, Groups E, F & G.
Available Downloads
Bulk Pro Systems
Model SS-2C Pull Cord Switch
The Model SS-2C Pull Cord Switch is a conveyor safety accessory designed to interlock with the conveyor shut down systems in the event of maintenance or an emergency.
When force is applied to the cable on either side of the switch the actuator arm rotates and locks in the alarm position.
This activates two (2) micro switches and the manual lock out.
Once the maintenance is done or the emergency is cleared the switch can be reset by pressing down and releasing the manual reset lever.
Model SS-2C Pull Cord Switches are typically mounted on the walkway side of the conveyor or in situations where the conveyor is accessible from the ground.
The SS-2C has CE agency approval.
- Simple, reliable construction requiring no maintenance
- Easy installation
- Die cast aluminum enclosure
- Corrosion resistant yellow epoxy polyester powder coat finish with red roller arm
- Two (2) contact outputs for shutdown and alarm notification
- 304 stainless steel hardware and shafts
- Four (4) bolt mounting from the bottom or the back of the switch
- CE Approved
Available Downloads
Bulk Pro Systems
Model SS-3 Pull Cord Switch
The Model SS-3 Pull Cord Switch is a conveyor safety accessory designed to interlock with the conveyor shut down systems in the event of maintenance or an emergency.
When force is applied to the cable on either side of the switch the actuator arm rotates and locks in the alarm position.
This activates two (2) micro switches and the manual lock out.
Once the maintenance is done or the emergency is cleared the switch can be reset by pressing down and releasing the manual reset lever.
Model SS-3 Pull Cord Switches are typically mounted on the walkway side of the conveyor or in situations where the conveyor is accessible from the ground.
The SS-3 Pull Cord Switch can be ordered in standard and CSA approved versions.
CSA approved version SS-3X is also approved for Class II, Div. 1 & 2, Groups E, F & G.
- Simple, reliable construction requiring no maintenance
- Easy installation
- Die cast aluminum enclosure
- Corrosion resistant yellow epoxy polyester powder coat finish with red roller arm
- Two (2) contact outputs for shutdown and alarm notification
- 304 stainless steel hardware and shafts
- Two (2) bolt mounting from the bottom or the back of the switch
- Standard and CSA Approved versions available
- CSA approved version SS-3X is also approved for Class II, Div. 1 & 2, Groups E, F & G.
